Purdue engineers have figured out a way to tackle plastic landfills while also improving battery life by putting ink-free plastic soaked in sulfur-containing solvent into a microwave, and then used it as a carbon scaffold in batteries.

       Lithium-sulfur batteries have been hailed as the next generation of batteries to replace the current lithium ion variety. Lithium-sulfur batteries are cheaper and more energy-dense than lithium ions, which would be important characteristics in everything from electric vehicles to laptops. But the knock on lithium-sulfur batteries to this point is that they don't last as long, being usable for about 100 charging cycles.

       "No matter how many times you recycle plastic, that plastic stays on the earth," said Vilas Pol, associate professor in Purdue's School of Chemical Engineering. "We've been thinking of ways to get rid of it for a long time, and this is a way to at least add value."

       The need to reduce landfills runs parallel to making lithium-sulfur batteries good enough for commercial use. Because lithium-sulfur batteries are getting more popular and needs to be long lasting as well.

       Low-density polyethylene plastic, which is used for packaging comprises a big portion of plastic waste. This plastic helps to address a long-standing issue with lithium-sulfur batteries, a phenomenon called the polysulfide shuttling effect that limits how long a battery can last between charges. Lithium-sulfur batteries, as their name suggests, have a lithium and a sulfur. When a current is applied, lithium ions migrate to the sulfur and a chemical reaction takes place to produce lithium sulfide. The byproduct of this reaction, polysulfide, tend to cross back over to the lithium side and prevent the migration of lithium ions to sulfur. This decreases the charge capacity of a battery as well as lifespan. The easiest way to block polysulfide was to place a physical barrier between lithium and sulfur. Previous studies had attempted making this barrier out of biomass, such as banana peels and pistachio shells, because the pores in biomass-derived carbon had the potential to catch polysulfide.

       "Every material has its own benefit, but biomass is good to keep and can be used for other purposes," Pol said. "Waste plastic is really valueless and burdensome material."

       Researchers thought of how plastic might be incorporated into a carbon scaffold to suppress polysulfide shuttling in a battery. Past research had shown that low-density polyethylene plastic yields carbon when combined with sulfonated groups. The researchers soaked a plastic bag into sulfur-containing solvent and put it in a microwave to cheaply provide the quick boost in temperature needed for transformation into low-density polyethylene. The heat promoted the sulfonation and carbonization of the plastic and induced a higher density of pores for catching polysulfide. The low-density polyethylene plastic could then be made into a carbon scaffold to divide the lithium and sulfur halves of a battery coin cell.

       "The plastic-derived carbon from this process includes a sulfonate group with a negative charge, which is also what polysulfide has," Kim said. Sulfonated low-density polyethylene made into a carbon scaffold, therefore, suppressed polysulfide by having a similar chemical structure.

       "This is the first step for improving the capacity retention of the battery," Pol said. "The next step is fabricating a bigger-sized battery utilizing this concept.”

Figure. Experimental set up showing low density soaked plastic in a sulfur-containing solvent, putting it into a microwave and transforming it into a carbon scaffold, making the lithium-sulfur batteries last longer and retain elevated capacity.

Image Credit: Purdue University/Patrick Kim

Source: www.sciencedaily.com